Door Window Inserts For Haas Garage Door
Door window inserts present a great way to renew the look of your Haas garage door. This window inserts are made of plastic and are installed inside the window frame between the glass and the frame. Haas, like many other manufacturers, offers a wide range of inserts for typical grid inserts to make designs for the sunset. Installation of window inserts for garage doors Haas requires an assistant. Consult your assistant to stay outside of the Haas door and keep the outside window frame. This prevents the outer frame from falling off the door when the retainers are removed.
Insert a small flat-blade screwdriver into the left corner of the mount retainers inside. Slide the screwdriver under the left retainer and pry the end away from the door window inserts frame. Remove the retainer on the right side and the lower retainer in the same way. Once the bottom side and retainers are outside the window, lift one end of the top retainer. Hold the center of the cup with one hand and pull the upper stopper out from the window frame with your free hand. Gently pull the glass from the window frame.
Place the door window inserts in the window frame, while your assistant continues to hold the outside of the frame. Place the glass back into the window frame on the back of the insert. Hold the glass in place with one hand and press the top retainer into place on top of the frame. Press the retainer with your finger until the edge of the retainer extends over the glass. Install the remaining three retainers, as did the upper retainer.